flash_on
100% Canadian Owned and Operated – Shipping across Canada and America – 24*7 Emergency Services
flash_on
100% Canadian Owned and Operated – Shipping across Canada and America – 24*7 Emergency Services
flash_on
100% Canadian Owned and Operated – Shipping across Canada and America – 24*7 Emergency Services
flash_on
100% Canadian Owned and Operated – Shipping across Canada and America – 24*7 Emergency Services
flash_on
100% Canadian Owned and Operated – Shipping across Canada and America – 24*7 Emergency Services

Eaton/Cutler-Hammer F10 Unitrol NEMA Size 5 FVNR Combination Starter - Fusible Type - 600V

star
star
star
star
star

Product Code:
In Stock
Available
Part Number
ECH-F10-CS5-F-F-600
Manufacturer
Eaton
Cutler-Hammer
Current Rating
270A
Voltage Rating (V)
600V
Number of Poles
3P
Weight
200 lbs
Dimensions
42" H x 20" W x 24" D
Standards Compliance
UL 845, UL 508A, NEC Article 240/430, IEC 61439-2
UL Listed
Yes
Bucket Type
Combination Starter
HP Rating
300HP
Frequency
60Hz
Starter Configuration
FVNR
Protection Variant
Fusible
NEMA Size
5
Interrupting Capacity AIC
200kAIC
Contactor Type
NEMA
Coil Voltage
120VAC
Overload Relay Type
Electronic Overload Relay
Overload Rating
270A
Mounting Type
Plug-In
Bus Configuration
Rear Connected
NEMA Enclosure Rating
NEMA 1
Communication Protocol
None Standard, DeviceNet/Modbus Optional
Standards Compliance
UL 845, UL 508A, NEC Article 240/430, IEC 61439-2
Application Use Case
HVAC
Special Features
FVNR Fusible Protected Combination Starter

Eaton/Cutler-Hammer F10 Unitrol NEMA Size 5 FVNR Combination Starter - Fusible Type - 600V

NEMA 5 | 270A | 300HP | 600V/3P | FVNR | Fusible Protected

This Eaton/Cutler-Hammer F10 Unitrol NEMA Size 5 FVNR combination starter is purpose-built for critical infrastructure. Rated for 300HP at 600V three-phase service with 270A continuous current capacity, this fusible-type combination starter provides coordinated motor protection and control in a compact plug-in MCC bucket module. The FVNR configuration delivers full-voltage non-reversing motor starting with factory-matched contactor, overload relay, and fusible disconnect, simplifying inventory management with standardized form factors. Widely deployed across building automation systems, conveyor networks, and packaging lines, this F10 Unitrol bucket features NEMA-rated components for maximum reliability and NEC Article 430 compliance. Each unit ships factory-assembled, wired, and tested with UL 845 listing for immediate plug-in installation.